If you use a stroller in the United States, a Lascal buggyboard Maxi can give an older child a place to stand when they are tired of walking. It attaches to the rear of many single strollers, including some popular US models. The exact fitting method depends on your stroller frame and the connector set included with your board.
The basic process is simple: place the two connectors on the stroller frame, adjust them so the board sits level, tighten them firmly, and test the board before your child steps on it. Always check the manual for your exact BuggyBoard Maxi model and stroller.
What You Need Before Attaching the BuggyBoard Maxi
Before you start, gather the board, both stroller connectors, the supplied screws or fasteners, and the fitting tool included with your model. You also need a clear space where you can turn the stroller over or inspect the rear frame.
Check these points first:
- Confirm that you have a BuggyBoard Maxi, not a Mini or a different Lascal model.
- Check the board’s weight limit on the product label or manual.
- Make sure your stroller has a solid rear frame or tube where the connectors can attach.
- Remove bags and other items from the stroller basket.
- Engage the stroller parking brake.
- Keep your child away while you install and adjust the board.
- Inspect the board, wheels, pins, and connectors for cracks or damage.
The BuggyBoard Maxi is designed for a standing child who can hold on and follow simple instructions. It is not a seat, restraint system, or replacement for a stroller harness.
If your stroller has a curved frame, a folding joint, a brake cable, or an unusual rear axle, do not force the connector into place. Lascal sells or specifies different connector types for some stroller designs. A connector that fits poorly may loosen or affect folding and steering.
How to Attach a BuggyBoard Maxi
The following method covers the general installation. Connector shapes and screw locations can vary by BuggyBoard Maxi version, so use the supplied instructions when they differ.
1. Put the stroller in a stable position
Set the stroller on a flat surface. Apply the parking brake and make sure the stroller cannot roll.
Stand behind the stroller and identify two strong frame tubes near the lower rear section. The connectors should sit on the frame, not on a thin plastic cover, removable fabric, brake cable, or folding hinge.
Do not attach the board to a part that moves when you fold the stroller. The mounting points must stay fixed while the stroller is in use.
2. Place the first connector on the frame
Open the first connector and place it around the selected frame tube. Keep it at the same height you plan to use on the other side.
The connector should sit squarely on the tube. It should not twist, slide toward a hinge, or press against a brake part.
If the frame tube is too wide or too narrow for the supplied connector, stop. Do not stretch, drill, bend, or modify the connector. Check whether your BuggyBoard Maxi requires a different Lascal adapter.
3. Attach the second connector
Fit the second connector to the opposite side of the stroller frame. Try to match the height and angle of the first connector.
The two connectors should form a level mounting line across the back of the stroller. Uneven connectors can make the board tilt, reduce ground clearance, or cause one side to carry more load.
Leave the fasteners slightly loose at first. This allows you to adjust the spacing before final tightening.
4. Connect the BuggyBoard Maxi
With both connectors loosely fitted, bring the board behind the stroller. Align the board’s attachment arms or pins with the connector openings.
Depending on the version, the board may click into the connectors or slide into place. You should hear or feel a positive lock. Never rely on friction alone.
If the board does not line up, adjust the connectors rather than forcing the board. A forced connection can damage the locking parts.
5. Set the board height and angle
Adjust the mounting position so the board is as level as possible when the stroller stands on its wheels. The board should have enough clearance from the ground during normal walking.
Check the following:
- Both sides are attached at the same height.
- The board does not drag on the ground.
- The wheels turn freely.
- The board does not hit the stroller basket or rear axle.
- The stroller handle remains comfortable to use.
- The board does not block the parking brake.
- The child will stand in the center of the board.
Some BuggyBoard Maxi versions use adjustable arms or connector positions. Make small changes on both sides instead of making a large adjustment on one side only.
6. Tighten the connectors
Once the board is level, tighten the connector fasteners with the supplied tool. Tighten each side evenly.
Do not use excessive force. Over-tightening may damage the frame or connector. Under-tightening may allow the board to rotate or slide during use.
After tightening, try to move each connector by hand. A properly fitted connector should not spin around the frame or move up and down.
7. Test the board without a child
Release the stroller brake and push the empty stroller slowly over a flat surface. Turn left and right, stop, and apply the brake.
Watch for:
- A loose connector
- A board that swings from side to side
- Wheel rubbing
- Contact with the brake
- Reduced steering control
- The board lifting or scraping during turns
- A stroller that feels unstable
Then apply firm downward pressure to the center of the board with your hands. This is not a substitute for the manufacturer’s safety test, but it can reveal a loose fitting before use.
If anything shifts, stop and adjust the installation.
How to Check That the BuggyBoard Maxi Is Attached Correctly
A correctly installed BuggyBoard Maxi stays secure when the stroller moves, turns, and stops. The board should remain level and should not swing freely from its mounting points.
Use this quick check before every outing:
| Check | What you should see |
|---|---|
| Connectors | Both are tight and do not rotate |
| Locking points | Fully engaged on both sides |
| Board position | Level or within the range stated in the manual |
| Wheels | Turn freely without rubbing |
| Brake | Easy to apply and not blocked |
| Folding system | Works only if the manual allows folding with the board attached |
| Stroller balance | Stable when empty and with the child standing correctly |
| Child position | Child stands in the center and holds the stroller handle |
The most important sign of success is not a loud click. It is a secure connection combined with normal stroller control.
Check the attachment again after the first short walk. New fittings can settle slightly, especially if the connectors were not fully seated during the first adjustment.
BuggyBoard Maxi Installation Problems and Fixes
The board will not click into place
The connectors may be too far apart, too close together, or mounted at different heights. Loosen them slightly, align the board arms with the connector openings, and try again.
Do not hammer or force the board into the connectors. If the parts still do not match, confirm that the connectors belong to your model.
The board sits too low
The mounting points may be too low, or the stroller frame may not be suitable for the standard connector position. Check the adjustment range in the manual.
A low board may scrape on ramps, curbs, or uneven sidewalks. Do not use it if ground clearance is poor.
The board tilts to one side
One connector is probably higher, farther forward, or tighter than the other. Place the stroller on a flat surface, loosen both sides, and align them again.
Also check that the board arms are fully seated. A partly engaged connection can look level at first and then tilt under load.
The stroller is hard to steer
A ride-on board changes the space behind the stroller. Your feet may contact the board, or the added load may alter how the stroller feels.
Move the connectors only within the adjustment range provided by Lascal. If steering remains difficult, the stroller and board may not be a suitable combination.
The brake is blocked
The connector or board may be mounted too close to the brake pedal or cable. Do not use the board until the brake works normally.
Never route the board over a brake cable or remove a stroller brake part to make the board fit.
The stroller will not fold
Some stroller and board combinations cannot fold with the BuggyBoard attached. Others may fold only after the board is lifted, removed, or placed in a specific position.
Check both manuals. Do not force the stroller closed, because this can damage the frame, board arms, or locking mechanism.
The connector keeps slipping
A connector may be on the wrong frame section, may not match the tube size, or may have a damaged fastener. Clean dirt from the frame and inspect the connector.
If it still slips after correct tightening, stop using the board. Replace the damaged part or contact Lascal or the stroller maker for compatibility help.
Safety Rules for Using a BuggyBoard Maxi
Use the BuggyBoard Maxi only with a child who meets the age, height, behavior, and weight guidance in the current manual. Lascal models and regional instructions can differ, so the product label is the final reference.
Follow these rules:
- Use the board only on a stroller that the manufacturer permits.
- Keep the child centered on the platform.
- Tell the child to hold the stroller handle.
- Walk slowly over uneven ground.
- Use extra care near curbs, stairs, ramps, and door thresholds.
- Never use the board on stairs or escalators.
- Do not let the child jump on or off while the stroller is moving.
- Do not leave the child standing on the board without an adult holding the stroller.
- Keep the child’s feet away from the wheels.
- Apply the stroller brake before the child gets on or off.
- Check the connectors often during use.
- Stop using the board if it cracks, bends, or becomes loose.
A standing board can affect stroller balance. Avoid hanging a heavy diaper bag or shopping bag from the handle, especially when a child is on the board. Extra weight high on the stroller can increase the risk of tipping.
For sidewalks, take curbs straight on and at a slow pace when possible. Do not pull the stroller backward over a curb with the child standing on the board.
Can You Fold a Stroller With the BuggyBoard Maxi Attached?
You may be able to fold some strollers with the BuggyBoard Maxi attached, but this is not universal. The answer depends on the stroller frame, connector position, and board version.
Before folding, check the following:
- Read the stroller manual.
- Read the BuggyBoard Maxi instructions.
- Remove the child from the board.
- Check whether the board must be lifted or detached.
- Keep hands and fabric away from hinges.
- Confirm that the stroller locks fully after folding.
Never force a folding mechanism. If the stroller requires unusual pressure, stop and remove the board before trying again.
A board that stays attached while folded may also make the stroller heavier or larger to carry. That trade-off may matter if you store the stroller in a car trunk or use public transportation in the US.
Will a BuggyBoard Maxi Fit Every Stroller?
No. The BuggyBoard Maxi is not guaranteed to fit every stroller.
Compatibility depends on the shape, width, height, and strength of the stroller’s rear frame. It also depends on where the brake, basket, folding joint, and rear wheels are located.
Before buying or installing one, compare:
- Stroller brand and model
- Stroller production version
- Rear frame tube shape
- Frame diameter
- Distance between possible connector points
- Brake location
- Folding design
- Board clearance
- Required adapter type
A product page may list popular stroller models, but a similar-looking stroller may have a different frame. Check the exact model name and version rather than relying on appearance alone.
If the stroller is not listed, contact the manufacturer or an authorized retailer with clear photos and the stroller’s model number. Do not assume that a universal connector fits every frame.
BuggyBoard Maxi vs. a Stroller Seat or Wagon
A BuggyBoard Maxi is useful when an older child sometimes walks but may need a short rest. It keeps the child standing behind the stroller and lets the younger child remain seated.
A stroller seat may be better for a child who needs support, naps often, or cannot safely stand and hold the handle. A stroller wagon may offer more room, but it has a different steering style, storage setup, and safety system.
Choose the board when:
- The child can stand steadily.
- The child can follow directions.
- You want to keep using your current stroller.
- You need a compact option for short trips.
Choose another setup when:
- The child cannot maintain balance.
- The child needs a harness or back support.
- The stroller becomes hard to steer.
- The board blocks the brake or folding system.
- You regularly travel over rough ground.
Maintenance and Storage
Clean the board and wheels after use on wet or dirty sidewalks. Remove grit from the wheels and inspect the connector area for sand or small stones.
Before storage, check for:
- Loose screws
- Cracks in the platform
- Bent arms
- Worn wheels
- Damaged locking parts
- Missing fasteners
Store the board in a dry place away from high heat. Do not use oil or grease on locking parts unless the manufacturer specifically recommends it. Lubricant can attract dirt or affect the way a plastic lock holds.
If you replace a part, use a genuine or manufacturer-approved component made for your exact BuggyBoard Maxi version. A similar-looking screw or connector may not have the right size or strength.
Key Takeaways
- Attach the two connectors to strong, fixed sections of the stroller frame.
- Keep both connectors level and tighten them evenly.
- Make sure the board locks on both sides.
- Test steering, braking, wheels, and ground clearance before use.
- Do not force the board, stroller, or folding mechanism.
- Follow the current Lascal instructions for your exact model.
- Stop using the board if it becomes loose or damaged.
Frequently Asked Questions
How tight should the BuggyBoard Maxi connectors be?
Tighten the connectors firmly with the supplied tool, but do not use excessive force. The connectors should not rotate or slide when you try to move them by hand. If they keep slipping, the issue may be incorrect compatibility rather than insufficient tightening.
Can a child sit on a BuggyBoard Maxi?
No. The BuggyBoard Maxi is a standing platform. Do not add a homemade seat or use the board as a seat unless the manufacturer provides a specific approved accessory for that model.
What age is the BuggyBoard Maxi for?
Use the age and weight guidance printed in the current Lascal manual or on the product label. The child must also be able to stand steadily, hold the stroller, and follow safety directions.
Can two children ride on the board?
No. The board is designed for one child within its stated limit. Two children can overload the platform and make the stroller unstable.
Why does my BuggyBoard Maxi drag on the ground?
The connectors may be too low, the board may be tilted, or the stroller may not provide enough clearance. Recheck the mounting height and adjustment range. Do not use the board if it scrapes during normal movement.
Do I need a special adapter?
You may need one if your stroller frame does not work with the standard connector. Check the exact stroller model and the current Lascal compatibility information before purchasing an adapter.
Final Check Before Your First Trip
Install the BuggyBoard Maxi with the stroller empty, then test it on a flat surface. Confirm that both connectors lock, the board stays level, the brake works, and the stroller remains easy to control.
After that, take a short walk without traffic or obstacles. Recheck the fasteners when you return. If the board shifts, the stroller feels unstable, or the parts do not match, remove it and seek model-specific guidance rather than modifying the fitting.
